How to reset Technicolor TC7200 (UPC) cable modem router

If you forgot your password or cannot access your Technicolor TC7200 cable modem you can reset it to its factory settings.
Or if you configured your router as "switch mode" (not as router mode) and you cannot access your modem at 192.168.0.1 you also need to RESET your cable modem.
Find the RESET hole on the back of the cabel modem VoIP Gateway rear panel and use a paper clip, pen, pencil or similar tool to press the RESET button for over 15 seconds.
The Technicolor (formerly known as Thomson) TC7200 modem will be revert back to its factory original settings. 
Reset button can be also used to restart the modem or press over 15 seconds can default the modem.

To get access the configuration page:
Type 192.168.0.1 in the browser's address bar to open the modem log in page. Note: If you are trying to access the modem via wifi connection, note that your wifi settings are also deleted so find the SSID and WPA2 password on the sticker on the modem and set up your wi-fi connection on your computer or tablet, mobile device.

Now that you are logged into your Technicolor TC7200 modem's configuration page, enter "admin" as the username and also "admin" as the password. Set up your modem as your need.

Please note:
In rare cases If both DS and US LEDs are flashing, it means the Wireless Voice Gateway is automatically updating its system software. Please wait for the lights to stop flashing. Do not remove the power supply or reset the Wireless Voice Gateway during this update process. The update process may take up to 5-10 minutes. Be patient!

technicolor tc7200 modem resetting
Technicolor TC7200 Wireless Voice Gateway Features
Full Band Capture Front End
Lowers Power with Advanced Power Management
Advanced Processor architecture.
Cable Europe Labs Euro-DOCSIS 1.0/1.1/2.0/3.0 Standard certified.
Euro-PacketCable 1.0/1.5 Standard certified.
Support Multiple Provisioning mode.
Standard RJ-45 connector for 10/100/1000BaseT Ethernet with auto-negotiation and MDIX functions.
RJ-11 Foreign Exchange Station (FXS) port for IP telephony.
Support simultaneous voice and data communications.
Echo Cancellation.
Voice Active Detection (VAD).
DTMF detection and generation.
Comfort Noise Generation (CNG).
Support V.90 fax and modem services.
SNMP network management support.
802.11a/b/g/n are supported, 20/40 MHz bandwidth.
Support Web pages and private DHCP server for status monitoring