Motorola BRAVO MB520 hard reset

    Before you buy a new cell phone or new tablet, please try the following procedure to repair your device. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well.


    Motorola BRAVO MB520 hard reset

    To perform an External Manual Reset of your handset to restore to factory settings, read instructions below and then perform.

    This will remove everything that was imported, added or installed on the device. When using this feature; information you have programmed in the handset is deleted, however, nothing stored on the MicroSD will be affected.

    Motorola Bravo hard reset keys
    For Bravo 2.1 (Eclair) devices (prior to upgrading)

    1. Remove and remount the battery. Turn on your phone by pressing the Power key and Volume Down button at the same time
    2. Continue to hold down Volume Down button until your screen will come to a Triangle with "!" exclamation mark with a little Android besides. After that, release Volume Down button
    3. Tap lower right of screen to enter to get into "Android system recovery <3e>" menu
    4. Use Volume Up/Down buttons to navigate in the menu and select “wipe data/factory reset”
    5. Tap Ok or press POWER
    6. Use Volume Up/Down buttons to navigate in the menu and select “Yes -- delete all user data”
    7. Tap Ok or press POWER
    8. Select "reboot system now"
    9. Tap Ok
    10. This will erase all user data on the phone internal memory and power up to the MOTOBLUR login screen

    For Bravo 2.2 (Froyo) devices

    1. Remove and remount the battery. Turn on your phone by pressing the Power key and Volume Down button at the same time
    2. Screen will come up with "triangle ! / Android", press Vol up/down key together until you get "Android system recovery" menu
    3. Using the volume key, navigate to third option "wipe data/factory reset", and tap the power button to confirm or select OK. Another Confirmation screen will come. Tap Yes and OK or tap the power button to confirm. User data will start to clear.
    4. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Select OK
    5. Phone will reboot to initial setup MOTOBLUR screen.

    Motorola Bravo hard reset keys