Huawei Ascend Y200 U8655 firmware upgrade using SD card
Force upgarde mode

What you need to upgrade your Huawei U8655 Y200 Android phone's software/firmware is:
    - Your Huawei Y200 phone with charged battery
    - a microSD card with at least 512 MB
    - the latest stock firmware from Huawei's official website

These versions can be upgraded, pls check it before you upgrade.
   
U8655-1V100R001C00B898
U8655-1V100R001C00B897
U8655-1V100R001C00B896
U8655-1V100R001C00B881SP01

Note: the force upgrade method can be used if your phone is not accessible, can't boot up or cannot be switced on.

1. Make sure you have backed up all your important data. All files, messages, images, videos, contacts etc.

2. Download the official update software from Huawei's website. (Go to Home / Support / Downloads, enter "y200 firmware" in the search box.
    Download the .zip file.
3. Unpack it on your Desktop. Copy the dload folder to your SD card's root directory.
4. Turn off your Huawei y200. (Make sure your battery has enough power. Charge it if necessary.) Insert the memory card.
5. Press both Volume keys and then the power key until the software upgrade progress bar displays. Then you can release all keys.
6. Wait until the progress bar finishes and the phone restart.
7. Check firmware version in Settings > About phone / build number

Note: If you haven't inserted the microSD card in the phone's memory slot, you will get a blank pink screen. To exit, simply press power to power off the phone.
Watch the video on YT

huawei ascend y200 firmware upgrade  huawei ascend y200 inside

Normal firmware upgrade method from menu

If your phone can boot up and is responding to screen input, you can use the normal firmware / software upgrade method from menu settings.

1. Make sure you have backed up all your important data. All files, messages, images, videos, contacts etc.2. Download the official update software from Huawei's website. (Go to Home / Support / Downloads, enter "y200 firmware" in the search box.)

OR visit this link http://consumer.huawei.com/en/search/index.htm?keywords=y200

    Download the .zip file.
e.g. HUAWEI Ascend Y200 firmware(U8655-1,Android 2.3,V100R001C00B898,General Version)

3. Unpack it on your Desktop. Copy the dload folder to your SD card's root directory.
4. Insert the memory card in the phone.
5. Turn on the phone.
6. Go to Settings > Storage > Software Upgrade > SD card Upgrade > Tap Confirm > Tap Upgrade.
7. Wait until the progress bar finishes and the phone restart.
8. Check firmware version in Settings > About phone / build number

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.