Gigabyte GSmart Akta A4 hard reset

  1. Fully charge the battery.
  2. Turn ON the device by pressing and holding the VOLUME UP key and the power key together.
  3. When Android system recovery menu appears, release VOLUME key.
  4. Highlight wipe data/Factory reset using volume up key.
  5. Confirm with Volume DOWN or Cancel using BACK key. Note: if power key not working use Volume DOWN for next step.
  6. Select Yes -- delete all data and confirm using power or Volume down key.
  7. After hard reset is done, highlight reboot system now and confirm your selection.
Note! All data will be deleted!
(In the menu use Volume down or power key to confirm) Be sure to backup your user data before doing a hard reset.
gigabyte gsmart akta a4 hard reset
unlock gigabyte gsmart akta a4 reset password remove unlock pattern
OR
Resetting Your Gigabyte GSmart Akta A4 Android Phone using menu option

With Clean Boot, you can reset your phone to its factory defaults. When you reset your phone, the data stored in your phone may be erased.
1. Tap Application Drawer > APPS tab > Settings > Backup & reset.
2. Tap Factory data reset > Reset phone > Erase everything to reset the phone

gigabyte gsmart Mika MX hard reset menu1  gigabyte gsmart Mika MX hard reset menu2   gigabyte gsmart Mika MX hard reset menu3
or

Reset Gigabyte GSmart Akta A4 using firmware update / ROM upgrade Pin unlock password


Before you upgrade or reinstall your phone's firmware, download the latest software for your phone Gigabyte GSmart
Download "GBC_update.zip" firmware file from Gigabyte official website and copy "GBC_update.zip" gigabyte update zip the zipped files to SD card's root directory. unzip GSmart Akta A4_V1.72.16.zip first.

Insert SD card into your phone.
1. Make sure your battery is 100% fully charged. Turn off the device.
2. Turn on the device while holding VOLUME UP key.
Release VOLUME UP key after Android icon and the recovery menu appears on the screen.
3. Press VOLUME UP key to select apply update from external storage, then press VOLUME DOWN key for next step.
4. Press VOLUME UP key to select GBC_update.zip, then press VOLUME DOWN key for next step.
5. The device will automatically update the ROM, The screen will show the status during the process.
Do not interrupt the operation while updating the ROM.
6. After reboot system, execute "Factory data reset" from Settings menu.
 
gigabyte mika mx firmware update1  gigabyte Mika MX firmware update2  gigabyte Mika MX firmware update3

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.