(Reading time: 1 - 2 minutes)

Resetting the Loox T810 Pocket-PC

Soft reset (warm start)

After certain applications or the installation of new programs, it may be necessary
to restart the Pocket PC with a soft reset.
Unsaved data will be lost. Shut down all programs before you restart the Pocket-PC.

Fujitsu Siemens Pocket Loox T810 Hard reset Soft reset


  1. Slide off the battery cover from the Pocket PC.
  2. Press the stylus tip once into the soft reset opening (1).
  3. The warm boot is carried out.


Cold starting and restoring factory default settings

Hard reset

If your Pocket PC stops working and switching off and on with the End button and the soft reset is
unsuccessful, you can perform a cold start with your Pocket PC or restore the factory default settings.
Unsaved data will be lost. Only carry out a cold start and reset when the battery is fully charged.

Fujitsu Siemens Pocket Loox T810 Hard reset Soft reset


  1. Slide the battery cover from the Pocket PC.
  2. At the same time press and hold the End button (1) and press the tip of the stylus pen into the soft reset opening (2).
  3. Release the End button as soon as a list of possible options is displayed on the screen.
  4. Select Skip if you would like to perform a normal cold start.
  5. To restore the Pocket PC to the factory defaults select Factory Defaults.

The selected option is performed.
It may take a few minutes for the factory defaults to be restored. At the end an acoustic signal sounds. Please follow the further instructions on the display.
The data memory is deleted when the Pocket PC is restored to its factory
defaults. This means: you will lose all data (documents, additionally installed programs, personal settings) that you haven't saved elsewhere. Always back up your data on a regular basis (memory card, FSC Backup).
If you have set a password using FSC SecureLock then this password will be retained.

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.