Switching on and off N520 with soft reset (Loox N520 warm boot)
After certain applications or the installation of new programs, it may be necessary to restart the
Pocket PC with the soft reset.
Unsaved data is lost. Shut down all programs before you restart the Pocket-PC.
Resetting the Pocket-PC (Cold start)
Briefly press the stylus tip (1) into the soft
If your Pocket-PC locks up and switching it on and off with the suspend/resume button and soft reset
has no effect, you can reset your Pocket-PC.
Unsaved data is lost. Shut down all programs before you reset the Pocket-PC.
Simultaneously press the Suspend/Resume button (1) and the stylus tip (2) into the soft reset opening.
Resetting Pocket PC to delivered state Hard reset
Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2).
Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds.
The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
When you reset your Pocket PC to the delivered state, the battery switches off so that the RAM content is lost. This means: You loose all data (documents, additionally installed programs, personal settings) that you haven't saved elsewhere.