Restarting the Pocket PC
Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
For your consideration, factoring into your safety and convenience, please refer to the following instructions in order:

1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus.

2. Default Settings procedures If the touch screen is functional, please tap Eten M750 reset start button, Programs, Utilities, and then Default Settings.

3. Clean Boot Hold the “Power Button” and press once on the “Reset Button” with the tip of the stylus, and
release both buttons simultaneously. Next, continually hold the End Button Eten M750 reset end  button until the system inquiry screen is displayed, then release
the End Button. Press Soft-Key to answer the question.

Eten M750 Reset

Reset method: Press the “Reset Button” of Pocket PC with the tip of the stylus.

Eten M750 hard reset

Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen.
Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain
the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.

 

Eten M750 Default Settings

Tap Eten M750  reset start button, Programs, Utilities, and then Default Settings

Eten M750 hard reset

1. If this application is inadvertently accessed, please select the Eten M750 hard reset to the upper right of the screen to exit,
the system will not be affected.
2. If you are certain that you wish to perform this action, please select the data input block on the right,
and enter the authorized code in the block to the left. Then tap the OK button.

 

Appropriate situation: If the Pocket PC is unable to maintain normal operation, but the touch screen is functional. Please refer to the
instructions in this section to troubleshoot.
Result: This will retain only the Microsoft Windows, and factory pre-installed applications. Other settings such as user’s input data, newly
installed programs, and user custom settings will all be cleared.

 

Cold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the

other. Simultaneously release both the “Power Button” and “Reset Button”.

Eten M750 hard reset

Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no
response, or if the screen is frozen. Before executing the preceding “Cold boot method”, please carefully
consider the following instructions and then decide on the cold boot
method.
1. After a cold boot is performed, if no buttons are pressed, when Pocket PC automatically completes the system startup process, the last display will be
the Today screen. This is identical to the reset result.
2. If a previous reset has already been attempted but the Pocket PC is still unable to maintain normal operation, consider the following solution:
After cold boot, hold the End Button Eten M750 reset end  button on the bottom right of Pocket PC until the system inquiry screen is shown, and then release the End
Button. Next, please read thoroughly through the instructions on cold booting before continuing carefully.

Perform cold boot and hold the End Button Eten M750 reset end  button. Please refer to the following instructions before careful consideration.

Eten M750 hard reset

Erase all data and load default? The default is “No.” If Yes or No was not
selected, after a few seconds the system will automatically execute the default No.

If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will
erase all data and load default. After your Pocket PC restarts, follow the instructions on
the screen to complete.

Caution!
1. After performing a cold boot, the system will retain Microsoft Windows and pre-installed programs. If you answer “Yes” to the question displayed
after a cold boot, other items such as the user’s input data, newly installed programs and user settings will be lost.
2. There are two ways to retain your data, loaded default and registry:
- Perform a Reset.
- Performing a Cold Boot, and answer “No” when the above question displays.

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.