How to hard reset Cingular 8125

Hard  reset Soft reset

9 Voice Command Press to start Voice Speed Dial; press and hold to record a voice note.
10 Infrared Port Let you exchange file(s) or data with other devices wirelessly.
11 RESET Button With the stylus, press the RESET button to soft-reset your device.
12 CAMERA Button Press to launch the camera. Press again when in camera mode to take a picture or record a video clip.

Resetting Your 8125 Pocket PC Phone (Soft reset)


Occasionally you may need to reset your Pocket PC Phone. A normal
(or soft) reset of your device clears all active program memory and
shuts down all active programs. This can be useful when the device is
running slower than normal, or a program is not performing properly. A
soft reset is also necessary after the installation of some programs. If a
soft reset is performed when programs are running, unsaved work will
be lost.
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve a
system problem. After a hard reset, the device is restored to its default
settings — the way it was when you first purchased it and turned it
on. Any programs you installed, data you entered, and settings you
customized on the device will be lost. Only Windows MobileTM software
and other pre-installed programs will remain.

 

To perform a soft reset

  • Use the stylus to lightly press and hold the RESET button on the left side of your device.
  • The device restarts and displays the Today screen.

Hard  reset Soft reset

Warning! Always turn off your device before performing a soft reset or installing/replacing the battery and SIM card.

To perform a Cingular 8125 hard reset

 

  1. Press and hold the Comm Manager button and Voice Command button on the device.
  2. Keep the two buttons pressed, and at the same time, use the stylus to lightly press and hold the RESET button.

Hard  reset Soft reset

 

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.