Full Reset Casio BE300

- While holding down the [Power] button, use the stylus to press the [Reset] button.

- This displays the initialization startup screen. After a short while, the touch screen calibration screen appears

- Follow the instructions that appear on the screen to set up your CASSIOPEIA.

- The Top Menu appears on the screen after setup is complete.

Resetting your CASSIOPEIA is the same as restarting your computer. Performing a
reset causes any data you are working on but have not saved yet to be lost, but data
saved in memory and other settings are basically left unchanged.
You should perform the reset operation whenever your CASSIOPEIA behaves
abnormally due to operational error or some other problem. The reset operation is
required in the following cases.
- When there is no response when you tap the screen or press a button
- When the icon that indicates some operation is in progress continues to rotate on the
screen for a long time

Check to make sure the battrery icon is not in the system tray before you press the reset button.

Performing the reset operation causes all user files and folders that are not contained
in the My Device\Nand Disk folder to be deleted. To keep a file or folder from being
deleted by the reset operation, store it in the My Device\Nand Disk folder or on a
storage card.

Though saved data is normally not lost when you perform a reset operation, abnormal
data in memory can cause all saved data to be cleared. Because of this, you should
always back up data to a storage card whenever possible before performing a reset
operation.

To reset your CASSIOPEIA
1. Turn on your CASSIOPEIA.
2. Use the stylus to press the [Reset] button.

3. The message "Starting..." appears on the display to let you know that the reset operation is starting.

Casio BE300 hard reset

The Top Menu should appear on the display after a short while. Since this procedure does not affect data and settings stored in memory, you can now continue using the CASSIOPEIA.

What to do if resetting does not solve the problem
Perform the following steps if resetting the CASSIOPEIA does not restore normal operation.
1. While holding down the [Power] button, use the stylus to press the [Reset] button.
This displays the initialization startup screen.
2. The message "Starting..." appears on the display to let you know that the reset operation is starting.
The Top Menu should appear on the display after a short while. Since this procedure does not affect data and settings stored in memory, you can now continue using the CASSIOPEIA.

Casio BE 300 SAFE mode

1. Connect the AC adapter to the CASSIOPEIA.
2. Press the [Power] button.
3. While holding down the [OK] button, use the stylus to press the [Reset] button.
This enters the Safe Mode.

Casio BE300 safe mode

4. Tap OK button.

This displays the touch screen calibration screen. Follow the instructions on the display to calibrate the touch screen.
The following screen appears after you finish touch screen calibration.