Alcatel Flash hard reset and Alcatel Flash soft reset
Alcatel Flash mobile phone is frozen, can't power on or you have forgotten your phone lock password
- Make sure your battery is not completely used up or damaged
- Remove your battery, remove your SIM card then reinstall them to power on again, if still does not work
- Hold down # key and press Power on/off key for a while to reset the phone
Long press "# key" and "power on key" at the same time in power off mode.
On the screen you will see "All data will be lost, continue?", select "Yes,"
You will see "Formatting flash, please wait." The phone will restart when reset finished.
ALL User phone data: contacts, photos, messages and files, downloaded applications like Java games will be lost permanently.
From the main menu, select the menu icon and select Restore default set.
Another way to restore factory settings is fromt he menu Go to MENU > Settings > RESTORE DEFAULT, select OK using LSK(Left soft key) or OK middle button, and input password. Default Alcatel Flash password is 1234. If you do not know your phone password, then try the hard reset method above.
A confirmation message should appear "Confirm to restore and reboot" select YES if you want to restore default factory settings.
If the previous methodes not working try the following:
1. Turn off the phone completely.
2. Press and hold both Volume UP + power on the phone.
3. When Android Recovery menu screen shows up release all keys.
4. Navigate and highlight "wipe data / factory reset" using the Volume down key and press power to confirm.
5. Navigate and highlight again to Yes -- delete all data and press power.
6. All data will be lost! Before doing a hard reset backup all important data.
After hard reset is done select Reboot system now. Press power to reboot the phone.
Troubleshooting
My Alcatel Flash cannot switch on
Check the battery contacts, remove and reinstall your battery, then turn your phone on
Check the battery power level, charge for at least 20 minutes.
If it still does not work, please use User Data Format to reset the phone
My phone is frozen or has not responded for several minutes
Restart your phone by pressing and holding the RED power key
Remove the battery and re-insert it, then restart the phone.
If it still does not work, please use User Data Format to reset the phone or
My phone turns off by itself
Make sure power off key is not mis-contacted
Check the battery charge level
If it still does not work, please use User Data Format to reset the phone
Note: As fair as I know there is no ONE TOUCH Upgrade tool for Alcatel Flash to upgrade software, despite the fact that the user manual refers to it. You cannot use ONE TOUCH Upgrade tool for Alcatel feature phones.