Resetting your Acer v200 Series

You may have to perform a reset if your Acer v200 Series no longer responds to the buttons on the screen.
Performing a soft reset
A soft reset allows your Acer v200 Series to get a fresh start, similar to rebooting a computer. All records and
entries are retained after a soft reset.
To perform a soft reset:
1 Make sure that your device is turn on.
2 On the rear panel of you device, use a pen or the tip of the paper clip and press on the reset button to
execute a soft reset.

Acer v200 hard reset

Performing a V200 hard reset


A hard reset will erase the time and date in your Acer v200 Series. The device will take a little longer to reboot
when you do a hard reset. The device will then sync with the GPS time after receiving the GPS signal. Never
perform a hard reset unless a soft reset does not correct your problem. To perform a hard reset follow the
instructions below:
On the rear panel of you device, slide the battery switch down and up again to hard reset your device. See
illustration below.

Acer v200 hard reset

 

How do I restore the system back to its default factory settings?
Performing a restore to factory default settings requires you to access the Navigation software settings.


Does performing a factory reset means a GPS reset as well?
Yes, it will reset the GPS settings.

 

 

General advice: Before you buy a new cell phone or new tablet, please try the following procedure to repair your device in a software way. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before doing factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.! Please also note, that a hard reset operation will not unlock your mobile phone's SIM lock or network lock, but it will remove the unlock pattern, remove the user password or PIN password (NOT the SIM card's 4 digit PIN code). Also note that the firmware version will not be affected in any way, it will not be downgraded, it will remain the same you are using and if you have rooted your device, root privileges remain also unaffected.