Acer beTouch E110 hard reset

    Before you buy a new cell phone or new tablet, please try the following procedure to repair your device. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well.


    Resetting your Acer E110 smartphone

    Resetting your smartphone
    You may have to perform a reset if your smartphone fails to respond when buttons are pressed or the screen is tapped.
    Note: Before performing a reset, ensure that your smartphone is not locked. Press any key or tap the screen to see if the phone
    responds.

    Acer E110 hard reset

    1. Charge your phone fully.
    2. Turn off your phone.
    3. Press CALL + Volume UP + PRESS power on.
    4. Release only power but keep pressing vol up + Call until menu.
    5. Select Data Erase/ Factory settings with Volume down, then confirm.

    Acer E110 Clean boot

    Warning! You should only perform a clean boot when all other options have failed to restore your smartphone to an operational
    state.

    A clean boot will restore your smartphone to the factory settings.
    Warning! This will erase all your personal information, any contacts stored on your phone and any programs you installed.
    1. Open the Applications tab and go to Settings > SD card & Phone storage > Factory data reset.
    2.On the Factory data reset screen, tap Reset Phone and then tap Erase everything.