Before you buy a new cell phone or new tablet, please try the following procedure to repair your device. First charge your battery, backup your important data if possible and in most cases take out SIM and SD card before factory reset. It is impossible to recover your data after doing a hard reset, so online backup is always important. For all of your data, a backup should be done on an external device, hard drive, raid system or media. With or without insurance, if your cell phone lost, damaged or stolen at least your invaluable data is backed up in a safe place. If you are about to sell your phone and you want to wipe your personal data, or if your phone affected with virus you have to do a hard reset. In some cases, you can delete the forgotten password or lock pattern from your device as well. All information is for devices with stock based ROMs. If you are using rooted device, always back up your EFS folder first, containing your IMEI info, etc.!


    Resetting your Acer E101 smartphone


    You may have to perform a reset if your smartphone fails to respond when buttons are pressed or the screen is tapped.
    Note: Before performing a reset, ensure that your smartphone is not locked. Press any key or tap the screen to see if the phone responds.

    Reset Acer E101

    Resetting will restart and clear the RAM of your smartphone. It is similar to turning a computer off and then turning it back on.
    Important: To reduce risking damage to your smartphone, only use the supplied stylus to reset the device.
    Use the tip of your stylus to lightly press the Reset button inside the hole on the side of your smartphone.

    Acer E101 Clean boot


    Warning! You should only perform a clean boot when all other reset options have failed to restore your smartphone to an operational state.
    A clean boot will restore your smartphone to the state it was when you got it from the factory.

    Warning! This will erase all your personal information, any contacts stored on your phone and any programs you installed.

    If your screen responds to stylus input: Go to Start > Utilities > Default Settings. Read the warning information and enter the security code in the empty textbox. Tap OK to proceed.

    Acer E101 hard reset with keys

    If your screen is not responding to stylus input:


    1. Push the Silent button up (the off position).
    2. Press and hold the Camera button, then press and release the reset button.
    3. Keep the Camera button pressed until you see the ‘Clean Boot’ screen.
    4. Press the Home button to continue.